Filter
Top Products
8·26
CHASSIS
INSPECTION AND DISASSEMBLY
Inspect the removed parts for the following abnormalities.
* Handlebars distortion
* Race wear and brinelling
* Bearing wear or damage
* Abnormal noise of bearing
If any abnormal points are found, replace defective parts with
the new ones.
• Remove the steering stem lower bearing inner race with a
chisel.
I
CAUTION
I
The removed bearing outer race must be replaced with
a new one.
• Drive out the steering stem bearing outer races (upper and
lower) using the steel rod.
I
CAUTION
I
The
removed bearing outer race must be replaced with
a new one.
REASSEMBLY AND REMOUNTING
Reassemble and remount the steering stem in the reverse order
of removal and disassembly.
Pay attention to the following points:
OUTER RACE
• Press in the upper and lower bearing outer races with the
special tools.
j';ooh
09941-34513: Steering outer race installer set
09913-70210: Bearing installer set
INNER RACE
• Press in the lower bearing inner race with the special tool.
jT'OOtI
09925-18011: Steering bearing installer
"
"
"
"
"
"
"
l_1iil
V