Filter
Top Products
• Tighten the crankcase bolts a little at a time to equalize the
pressure.
~
Crankcase bolt: (M6) initial: 6 N·m (0.6 kgf-m, 4.5 Ib-ft)
Final : 11 N·m (1.1 kgf-m, 8.0 Ib-ft)
(M8) initial: 15 N·m (1.5 kgf-m, 10.8 Ib-ft)
Final:
26 N.m (2.6 kgf-m, 19.0 Ib-ft)
NOTE:
* Fit the
new
copper washer to the crankcase bolts ®.
* Fit the
new
gasket washer to the crankcase bolts @.
• Check that the driveshaft and countershaft rotate smoothly.
ENGINE
3-81