Filter
Top Products
6·12
EXHAUST
SYSTEM
EXCV REMOVAL
• Disconnect the two cables from the EXCVA pulley. (Refer to
the EXCVA REMOVAL procedures.) (
CT"6-4)
• Remove the muffler joint pipe
CD
together with the muffler
body
~
by removing the mounting bolts and loosen the con-
nector bolt.
• Remove the EXCV cover
@ and disconnect the two cables
from the EXCV pulley.
EXCV INSPECTION
• Turn the EXCV by hand and check that it moves smoothly.
• If it does not move smoothly, replace the EXCV together with
the muffler joint pipe.
• Decarbonize the EXCV if necessary.
I
CAUTION
I
* Do not attempt to disassemble the EXCV.
* The EXCV is available only as the muffler joint pipe
assembly.