Filter
Top Products
2-26
PERIODIC
MAINTENANCE
Rear brake
• The extent of brake pad wear can be checked by observing
the grooved limit line
® on the pad. When the wear exceeds
the grooved limit line, replace the pads with new ones.
(c::::T"8-65)
ICAUTION I
Replace
the
brake pads as a set, otherwise braking
performance
will
be adversely affected.
BRAKE PEDAL HEIGHT
• Loosen the lock-nut
CD,
• Turn the push rod
~
until the brake pedal is 60 - 70 mm (2.4
- 2.8 in)
® below the top of the footrest.
• Tighten the lock-nut
CD
securely.
~
Rear brake master
cylinder
rod lock-nut:
18 N·m (1.8 kgf-m, 13.0 Ib-ft)
_ Brake pedal height ®:
Standard: 60 - 70 mm (2.4 - 2.8 in)
BRAKE LIGHT SWITCH
• Adjust the rear brake light switch so that the brake light will
come on just before pressure is felt when the brake pedal is
depressed.
-
-