Filter
Top Products
3·76
ENGINE
• Insert the right and left-thrust bearings with oil groove ® fac-
ing the crank web.
NOTE:
Right-thrust bearing has green painting.
BALANCERSHAFT
• Install the thrust washers
CD,
CZl
and oil seal @.
• Apply MOLYBDENUM OIL SOLUTION to each balancershaft
journal lightly.
""if
MOLYBDENUM
OIL
SOLUTION
• Set the balancershaft so that its punch mark ® is aligned with
the index
® on crankshaft.
CRANKCASE
• Clean the mating surfaces of the crankcases.
• Install the dowel pins
CD
and O-ring
CZl
to the upper crank-
case.