Filter
Top Products
• Install the gearshift shaft/gearshift arm @ with the washers as
shown.
NOTE:
Pinch the gearshift arm stopper(J) with return spring ends ©.
• Install the washer @ and snap ring ®.
OIL PUMP
• Install the O-ring to the oil pump and apply grease to it.
I
CAUTION
I
Use the new O-ring to prevent oil leakage.
~
99000-25030: SUZUKI SUPER GREASE
"A"
(USA)
99000-25010: SUZUKI SUPER GREASE
"A"
(Others)
NOTE:
Set the oil pump shaft end to the water pump shaft.
• Install the oil pump with the three bolts and then tighten them
to the specified torque.
~
Oil pump mounting bolts: 10 N·m (1.0 kgf-m, 7.0 Ib-ft)
• Install the washer
CD
and the pin
(2).
NOTE:
Be careful not to drop the washer
CD
and the pin
(2)
into the
crankcase.
• Install the oil pump driven gear @.
• Install the snap ring @.
ENGINE
3·91