Filter
Top Products
I
Cam chain tension adjuster
• Retract the push rod by pushing the stopper
CD.
• Install the ball
C2l
to the cam chain tension adjuster.
• Install the new gasket.
I
CAUTION
I
Use the new gasket to prevent oil leakage.
• Install the cam chain tension adjuster @ and tighten the
mounting bolt.
~
Cam chain tension adjuster mounting bolt: 10 N·m
(1.0 kgf-m, 7.0 Ib-ft)
• Install the spring @.
• Install the gasket @ and cam chain tension adjuster cap bolt
@.
--/
NOTE:
Click sound is heard when the cam chain tension adjuster cap
bolt is installed.
• Tighten the cam chain tension adjuster cap bolt to the speci-
fied torque.
~
Cam chain tension adjuster cap bolt: 23 N·m
(2.3 kgf-m, 16.5 Ib-ft)
I
CAUTION
I
After installing the cam chain tension adjuster, check
to be sure that the adjuster works properly by check-
ing the slack of cam chain.
• Cut the wire clamps.
• After installing the cam chain tension adjuster, rotate the
crankshaft (some turns), and recheck the positions of the
camshafts.
(c::::7'3-102)
ENGINE
3-101