Filter
Top Products
ENGINE 3-19
OIL PUMP DRIVE SPROCKET
• Remove the spacer 1.
• Remove the oil pump drive sprocket 2 and chain 3.
• Remove the thrust washer 4.
GEARSHIFT SYSTEM
• With the snap ring 1 and washer removed, remove the gear-
shift shaft assembly 2.
• Remove the gearshift cam plate bolt 3 and gearshift cam
plate 4.
• Remove the gearshift cam stopper 5.
STARTER IDLE GEAR AND GENERATOR COVER
• Remove the starter idle gear cover.
• Remove the spring washer 1, washer 2 and starter idle gear
No. 1 3.