Filter
Top Products
ENGINE 3-7
ENGINE SPROCKET AND GEARSHIFT LEVER
• Disengage the gearshift lever 1.
• Remove the engine sprocket cover 2.
• Remove the clutch push rod 3.
• Remove the speed sensor rotor 4.
• Remove the engine sprocket nut 5 and the washer 6.
• Remove the cotter pin. (For E-03, 28, 33)
• Loosen the rear axle nut 7.
• Loosen the chain adjuster lock-nuts 8.
• Loosen the chain adjusters 9.
• Push the rear wheel forward and make sure that the drive
chain has enough slack.
• Disengage the drive chain from the rear sprocket.