Filter
Top Products
CHASSIS 8-77
BRAKE FLUID REPLACEMENT
• Remove the brake fluid reservoir mounting bolt 1.
• Place a rag underneath the brake fluid reservoir to catch any
split brake fluid. Remove the brake fluid reservoir cap 2.
• Replace the brake fluid in the same manner as the front
brake. (8-66)
Specification and classification: DOT 4
CALIPER REMOVAL AND DISASSEMBLY
• Drain the brake fluid.
• Remove the brake hose from the caliper by removing the
union bolt 1 and catch the brake fluid in a suitable recepta-
cle.
NOTE:
Place a rag underneath the union bolt on the brake caliper to
catch any split brake fluid.
• Remove the pad mounting pin 2.
• Remove the caliper mounting bolt 3.
• Remove the brake caliper.
Bleed air from the brake system. (2-23)
Never reuse the brake fluid left over from previous
servicing and stored for long periods.
Brake fluid, if it leaks, will interfere with safe running
and discolor painted surfaces. Check the brake hose
and hose joints for cracks and fluid leakage.