Filter
Top Products
8-6 CHASSIS
SCREEN
REMOVAL
• Remove the screen 1 by removing the screws.
INSTALLATION
• Install two nuts (middle ones) as shown.
• Install the window screen.
BODY COWLING
REMOVAL
• Remove the left and right under cowlings. (8-5)
• Remove the screen. (Above)
• Remove the combination meter. (9- )
• Disconnect the turn signal lead wire couplers 1.
• Remove the rear view mirror/turn signal assemblies 2.
• Remove the screws.
• Disconnect the lead wire coupler 3 and remove wire clamp
4.
• Remove the body cowling.
INSTALLATION
• Install the body cowling in the reverse order of removal.
• Refer to the turn signal cable routing. (10- )