Filter
Top Products
8-62 CHASSIS
• Remount the plate 1.
• Remount the chain cases 2 chain buffer 3 and rear fender
(lower) 4.
SWINGARM PIVOT THRUST CLEARANCE ADJUSTMENT
Adjust swingarm pivot thrust clearance in the following procedure.
• Insert the swingarm pivot shaft and tighten to the specified
torque.
09944-28320: Hexagon socket (19 mm)
Swingarm pivot shaft: 15 N·m (1.5 kgf-m, 11.0 lb-ft)
• Hold the swingarm pivot shaft and tighten the swingarm pivot
nut 1 to the specified torque.
Swingarm pivot nut: 100 N·m (10.0 kgf-m, 72.5 lb-ft)
• Tighten the swingarm pivot lock-nut to the specified torque
with the special tool.
09940-14940: Swingarm pivot thrust adjuster socket
wrench
Swingarm pivot lock-nut: 90 N·m (9.0 kgf-m, 65.0 lb-ft)