Filter
Top Products
CHASSIS 8-21
• Remove the oil seal E with the special tool.
09913-50121: Oil seal remover
• Remove the oil seal retainer F.
INSPECTION
INNER AND OUTER TUBES
• Inspect the inner tube outer surface and outer tube inner sur-
face for scratches.
• Inspect the “ANTI-FRICTION” metal surfaces for scratches.
• If any defects are found, replace them with the new ones.
FORK SPRING
• Measure the fork spring free length.
• If it is shorter than the service limit, replace it with a new one.
Front fork spring free length A:
Service Limit: 241 mm (9.49 in)
The removed oil seal must be replaced with a new one.
Do not remove the “ANTI-FRICTION” metals, A and
B.