Filter
Top Products
8-46 CHASSIS
WHEEL DAMPER
• To install the wheel dampers, apply a special tire lubricant or
neutral soapy liquid to the damper surface.
DUST SEALS
• Install the new dust seal with the special tool.
09913-70210: Bearing installer set
• Apply SUZUKI SUPER GREASE “A” to the dust seal lip
before assembling rear wheel.
99000-25010: SUZUKI SUPER GREASE “A”
(or equivalent grease)
REAR SPROCKET AND SPROCKET MOUNTING DRUM
• Install the rear sprocket mounting drum spacer 1.
• Install the rear sprocket mounting drum to the rear wheel.
• Tighten the sprocket mounting nuts 2 to the specified torque.
Rear sprocket nut: 93 N·m (9.3 kgf-m, 67.5 lb-ft)
NOTE:
Stamped mark
A
on the sprocket should face outside.
• Install the collar 3.
* Never use oil, grease or gasoline on the damper in
place of the tire lubricant.