Filter
Top Products
ENGINE 3-15
• Turn the crankshaft to bring the line A on the CKP sensor
rotor to the rib B behind the clutch cover and also to bring the
cams to the position as shown.
• Remove the cam chain tension adjuster cap bolt 2 and
spring.
• Remove the cam chain tension adjuster 3.
• Remove the cam chain guide No. 2 4.
• Remove the camshaft journal holders 5.
• Remove the intake camshaft 6.
• Remove the exhaust camshaft 7.
• Remove the dowel pins.
Be sure to loosen the camshaft journal holder bolts
evenly by shifting the wrench in the descending order
of numbers.