Filter
Top Products
7-6 COOLING AND LUBRICATION SYSTEM
COOLING FAN
REMOVAL
(7-4)
INSPECTION
• Remove the right under cowling. (8-5)
• Disconnect the cooling fan coupler 1.
• Test the cooling fan motor for load current with an ammeter
connected as shown in the illustration.
• The voltmeter is for making sure that the battery 2 applies
12 V to the cooling fan motor 3. With the cooling fan motor
with electric motor fan running at full speed, the ammeter 4
should be indicating not 5 A and more.
• If the fan motor does not turn, replace the motor assembly
with a new one.
NOTE:
When making above test, it is not necessary to remove the cool-
ing fan.
INSTALLATION
(7-5)