Filter
Top Products
ENGINE 3-55
• Remove the driveshaft left bearing dust seal from the retainer
using the special tool.
09913-50121: Oil seal remover
Installation
• Install the bearings with the special tool.
09913-70210: Bearing installer set (1 32)
(2, 3 20)
NOTE:
The stamped mark side of the gearshift shaft bearing faces out-
side.
• Install new oil seal with the special tool.
09913-70210: Bearing installer set (22)
• Apply SUZUKI SUPER GREASE “A” to the oil seal lip.
99000-25010: SUZUKI SUPER GREASE “A”
(or equivalent grease)
• Install the bearing with the special tool.
09913-70210: Bearing installer set (68)
NOTE:
The stamped mark side of the driveshaft left bearing faces out-
side.