Filter
Top Products
CHASSIS 8-37
• Remove the left handle switch 5 and disconnect the clutch
lever switch lead wire.
• Remove the handle balancer 6.
• Remove the left handle grip 7.
• Disconnect the clutch cable 8.
• Remove the clutch lever holder 9.
• Loosen the handlebar clamp bolts and front fork upper clamp
bolts.
• Remove the steering stem upper bracket 0 by removing the
steering stem head nut.
NOTE:
Place a rag under the steering stem upper bracket to prevent
scratching the body cowling and the air intake pipes.
• Remove the handlebars A by sliding them upward.
INSTALLATION
Install the handlebars in the reverse order of removal. Pay atten-
tion to the following points:
• Install the handlebars temporarily.
• Install the steering stem upper bracket and washer.
(8-34)