Filter
Top Products
ENGINE 3-9
• Remove the engine mounting nut 2.
• Remove the engine mounting thrust adjuster lock-nut 3 with
the special tool.
• Loosen the engine mounting thrust adjuster 4 fully.
09940-14980: Engine mounting thrust adjuster
socket wrench
• Remove the engine mounting nut 5.
• Loosen the engine mounting thrust adjuster lock-nut 6 with
the special tool.
• Loosen the engine mounting thrust adjuster 7 fully.
09940-14980: Engine mounting thrust adjuster
socket wrench
NOTE:
Do not remove the engine mounting bolts at this stage.
• Remove the engine mounting bolts and gradually lower the
front side of the engine. Then, take off the drive chain from the
driveshaft.
• Remove the engine assembly.