Filter
Top Products
ELECTRICAL SYSTEM 9-29
COMBINATION METER
DESCRIPTION
This combination meter mainly consists of the stepping motor, LCD (Liquid Crystal Display) and LED (Light
Emitting Diode). This combination meter is light, thin and of high response compared to those currently in
use because of this composition.
The rpm pointer is driven by the stepping motor.
The LCDs indicate Speed, Odo/Trip1/Trip2/Clock/Fuel reserve’s trip and Engine coolant temp./FI (DTC)
respectively.
LED (Light Emitting Diode)
LED is used for the illumination light and each indicator light.
LED is maintenance free. LED is less electric-power consuming and stronger to vibration resistance com-
pared to the bulb.
Engine RPM indicator light
This speedometer is equipped the engine RPM indicator light. The engine RPM indicator light is adjustable
from 7 000 – 16 000 r/min. (from 7 000 r/min to 10 000 r/min, every 500 r/min and 10 000 r/min to 16 000
r/min, every 250 r/min initial setting: 13 000 r/min)
:
*1
*2
*3
*3
*4
1 Adjust switch (Trip/Clock/Engine revolution) 8 Engine coolant temperature/FI (DTC)
2 Tachometer 9 Gear position indicator
3 Speedometer *1 LED (Combination meter light)
4 Engine RPM indicator mark *2 LCD
5 Select switch *3 LED
6 Odo/Trip 1/Trip 2/Clock/Fuel reserve’s trip *4 Stepping motor
7 Engine RPM indicator light