10-50 SERVICING INFORMATION
SUSPENSION Unit: mm (in)
FUEL + OIL
ITEM STANDARD LIMIT
Front fork stroke 120
(4.92)
—
Front fork spring free length 268
(10.55)
241.2
(9.50)
Front fork oil level (without spring,
outer tube fully compressed)
107
(4.21)
—
Front fork oil type SUZUKI FORK OIL SS-05 or equivalent fork oil —
Front fork oil capacity (each leg) 413 ml
(14.0/14.5 US/Imp oz)
—
Front fork inner tube O.D. 41 (1.61)
Front fork spring adjuster 7 turns from softest position —
Front fork damping force adjuster Rebound 1-3/4 turns from stiffest position —
Compression 1-3/4 turns from stiffest position —
Rear shock absorber spring pre-set
length
181.4
(7.14)
—
Rear shock absorber damping
force adjuster
Rebound 1-3/4 turns from stiffest position —
Compression
Lo: 1-3/4 turns from stiffest position
Hi: 3 turns from stiffest position
Rear wheel travel 130
(5.12)
—
Swingarm pivot shaft runout
—
0.3
(0.01)
ITEM SPECIFICATION NOTE
Fuel type Use only unleaded gasoline of at least 87 pump
octane (R/2 + M/2) or 91 octane or higher rated by
the research method.
Gasoline containing MTBE (Methyl Tertiary Butyl
Ether), less than 10% ethanol, or less than 5%
methanol with appropriate cosolvents and corro-
sion inhibitor is permissible.
E-03, 28, 33
Gasoline used should be graded 91 octane or
higher. An unleaded gasoline is recommended.
Others
Fuel tank capacity
Including
reserve
15.5 L
(4.1/3.4 US/lmp gal)
E-33
16.5 L
(4.4/3.6 US/lmp gal)
Others
Fuel level
indicator light
lighting
Approx. 3.5 L
(3.7/3.1 US/lmp gal)
Engine oil type SAE 10 W-40, API SF/SG or SH/SJ with JASO MA
Engine oil capacity
Change
2.2 L
(2.3/1.9 US/lmp qt)
Filter change
2.5 L
(2.6/2.2 US/lmp qt)
Overhaul
2.9 L
(3.1/2.6 US/lmp qt)