Filter
Top Products
FI SYSTEM DIAGNOSIS 4-105
SENSORS
CMP SENSOR INSPECTION
The camshaft position sensor is installed on the cylinder head
cover. (4-33)
CMP SENSOR REMOVAL AND INSTALLATION
• Remove the CMP sensor. (3-26)
• Install the CMP sensor in the reverse order of removal.
CMP sensor: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
CKP SENSOR INSPECTION
The crankshaft position sensor is installed behind the clutch
cover. (4-35)
CKP SENSOR REMOVAL AND INSTALLATION
• Remove the clutch cover. (3-16)
• Install the clutch cover in the reverse order of removal.
IAP SENSOR INSPECTION
The intake air pressure sensor is installed at the rear side of the
air cleaner box. (4-38)
IAP SENSOR REMOVAL AND INSTALLATION
• Lift and support the fuel tank. (5-3)
• Remove the IAP sensor.
• Install the IAP sensor in the reverse order of removal.
TP SENSOR INSPECTION
The throttle position sensor is installed at the right side of the
No. 4 throttle body. (4-44)
TP SENSOR REMOVAL AND INSTALLATION
• Remove the aircleaner box and lift up the throttle body.
(5-14)
• Remove the TP sensor. (5-17)
• Install the TP sensor in the reverse order of removal.
TPS ADJUSTMENT
• Adjust the TP sensor. (4-20)