Filter
Top Products
ENGINE 3-77
• Install the clutch push rod oil seal retainer 1.
• Apply THREAD LOCK to the bolts.
99000-32110: THREAD LOCK SUPER “1322”
(or equivalent thread lock)
OIL PUMP
• Install the O-ring.
• Apply SUZUKI SUPER GREASE “A” to the O-ring.
99000-25010: SUZUKI SUPER GREASE “A”
(or equivalent grease)
• Install the dowel pins.
• Install the oil pump 1 and tighten the oil pump bolts to the
specified torque.
Oil pump mounting bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
OIL STRAINER AND OIL PRESSURE REGULATOR
• Apply SUZUKI SUPER GREASE “A” to the O-rings and press
in the oil strainer and oil pressure regulator to the crankcase.
99000-25010: SUZUKI SUPER GREASE “A”
(or equivalent grease)
Use a new O-ring to prevent oil leakage.
Use a new O-ring to prevent oil leakage.