Filter
Top Products
ENGINE 3-51
CRANKCASE
DRIVESHAFT AND GEARSHIFT CAM
Removal
• Remove the screws.
• Remove the gearshift fork shaft 1, gearshift cam 2 and
gearshift forks 3.
• Remove the spacer 4.
• Remove the driveshaft left bearing dust seal 5.
• Remove the driveshaft left bearing case bolts.
• By using suitable size bolts A, remove the driveshaft left
bearing case 6.
• Remove the dowel pin.
• Remove the driveshaft right bearing case bolts.
• By using suitable size bolts A, remove the driveshaft right
bearing assembly 7.