10-18 SERVICING INFORMATION
*2
Clamp
Position light (LH)
Wiring harness
Turn signal light (RH)
*3
6 N·m
(0.6 kgf-m, 4.5 lb-ft)
Wiring harness
Battery - lead wire
*4
*1
Clamp
Guide
Iginition switch
Handlebar switch (RH)
1 Rear combination light 8 Brake light switch
2 EXCVA 9 Horn
3 AP sensor 0 Regulator/rectifier
4 Starter relay *1 Lock part of the clamp should face inside.
5 Turn signal/side-stand relay *2 White marking.
6 TO sensor *3 Pass the lead wire through under the frame bridge.
7 Integrated clamp *4 To fan motor