Filter
Top Products
4-20 FI SYSTEM DIAGNOSIS
TPS ADJUSTMENT
1. Adjust the engine rpm to 1 300 r/min. (2-14)
2. Connect the special tool (Mode select switch) to the dealer
mode coupler at the wiring harness.
3. If the throttle position sensor adjustment is necessary, remove
the aircleaner box and lift up the throttle body. (5-14)
4. Loosen the screw and slide the throttle position sensor 1 to
bring the line to the middle.
5. Then, tighten the screw to fix the throttle position sensor.
09930-11950: Torx wrench
09930-82720: Mode select switch
The LCD displays the line for 0.4 sec. at a time, and when such
a display repeats two times, it indicates the current position
where the sensor is fixed.
A Incorrect
B Correct position