Filter
Top Products
SERVICING INFORMATION 10-43
CONROD + CRANKSHAFT Unit: mm (in)
OIL PUMP
ITEM STANDARD LIMIT
Conrod small end I.D. 14.010 – 14.018
(0.5516 – 0.5519)
14.040
(0.5528)
Conrod big end side clearance 0.10 – 0.20
(0.004 – 0.008)
0.30
(0.012)
Conrod big end width 19.95 – 20.00
(0.7854 – 0.7874)
—
Crank pin width 20.10 – 20.15
(0.7913 – 0.7933)
—
Conrod big end oil clearance 0.032 – 0.056
(0.0013 – 0.0022)
0.080
(0.0031)
Crank pin O.D. 30.976 – 31.000
(1.2195 – 1.2205)
—
Crankshaft journal oil clearance 0.010 – 0.028
(0.0004 – 0.0011)
0.080
(0.0031)
Crankshaft journal O.D. 29.982 – 30.000
(1.18039 – 1.18110)
—
Crankshaft thrust bearing thickness
Right side
2.425 – 2.450
(0.0955 – 0.0965)
—
Left side
2.350 – 2.500
(0.0925 – 0.0984)
—
Crankshaft thrust clearance 0.055 – 0.110
(0.0022 – 0.0043)
—
Crankshaft runout
—
0.05
(0.002)
ITEM STANDARD LIMIT
Oil pressure (at 60 °C, 140 °F) 100 – 400 kPa
(1.0 – 4.0 kgf/cm², 14 – 57 psi)
at 3 000 r/min
—