Filter
Top Products
8-60 CHASSIS
REASSEMBLY AND INSTALLATION
Reassemble and install the swingarm in the reverse order of disassembly and removal.
Pay attention to the following points:
Left Right
115 N·m
(11.5 kgf-m, 83.0 lb-ft)
50 N·m
(5.0 kgf-m, 36.0 lb-ft)
50 N·m
(5.0 kgf-m, 36.0 lb-ft)
78 N·m
(7.8 kgf-m, 56.5 lb-ft)
78 N·m
(7.8 kgf-m, 56.5 lb-ft)
98 N·m
(9.8 kgf-m, 71.0 lb-ft)
1 mm (0.04 in) 1 mm (0.04 in)
1 mm (0.04 in) 1 mm (0.04 in)
NOTE:
When installing the bearing, stamped mark on the
bearing must face outside.
Apply SUZUKI SUPER GREASE “A”
to the bearings, washers and dust seals.