Filter
Top Products
4-106 FI SYSTEM DIAGNOSIS
ECT SENSOR INSPECTION
The engine coolant temperature sensor is installed at the cylin-
der head. (4-49)
ECT SENSOR REMOVAL AND INSTALLATION
• Remove the ECT sensor. (7-7)
• Install the ECT sensor in the reverse order of removal.
ECT sensor: 18 N·m (1.8 kgf-m, 13.0 lb-ft)
IAT SENSOR INSPECTION
The intake air temperature sensor is installed to the air cleaner
box. (4-53)
IAT SENSOR REMOVAL AND INSTALLATION
• Lift and support the fuel tank. (5-3)
• Remove the IAT sensor from the air cleaner box.
• Install the IAT sensor in the reverse order of removal.
AP SENSOR INSPECTION
The AP sensor is located under the front seat. (4-57)
AP SENSOR REMOVAL AND INSTALLATION
• Remove the AP sensor from the frame.
• Install the AP sensor in the reverse order of removal.
TO SENSOR INSPECTION
TO SENSOR REMOVAL AND INSTALLATION
The tip-over sensor is located at the rear of seat tail rail.
(4-63)
• Remove the TO sensor.
• Install the TO sensor in the reverse order of removal.
NOTE:
When installing the TO sensor, the arrow mark
A
must be
pointed upward.
STP SENSOR INSPECTION
STP SENSOR REMOVAL AND INSTALLATION
The secondary throttle position sensor is installed at the right
side of the No. 4 throttle body.
• Remove the aircleaner box and lift up the throttle body.
(5-14)
• Remove the STP sensor. (5-17)
• Install the STP sensor in the reverse order of removal.