Filter
Top Products
3-84 ENGINE
• Install the gearshift cam stopper plate 5.
NOTE:
Align the gearshift cam pin
B
with the gearshift cam stopper
plate hole
C
.
• Apply a small quantity of THREAD LOCK to the gearshift cam
stopper plate bolt and tighten it to the specified torque.
99000-32050: THREAD LOCK “1342”
Gearshift cam stopper plate bolt:
13 N·m (1.3 kgf-m, 9.5 lb-ft)
• Install the washer 6 and gearshift shaft assembly 7.
NOTE:
Pinch the gearshift arm stopper
8
with return spring ends.
• Install the washer 9 and snap ring 0.
OIL PUMP DRIVE SPROCKET
• Install the thrust washer onto the countershaft.
NOTE:
The chamfer side
A
of thrust washer should face the crankcase
side.