Filter
Top Products
ENGINE 3-83
• Install the starter idle gear No. 1 shaft 5, thrust washer 6,
bearing 7, starter idle gear No. 1 8, washer 9, and spring
washer 0.
• Apply SUZUKI SUPER GREASE “A” to the O-ring.
99000-25010: SUZUKI SUPER GREASE “A”
(or equivalent grease)
• Install the starter idle gear cover and tighten its bolts to the
specified torque.
Starter idle gear cover bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
GEARSHIFT SYSTEM
• Install the gearshift cam stopper 1, bolt 2, collar 3 and
return spring 4.
NOTE:
Apply a small quantity of THREAD LOCK to the gearshift cam
stopper bolt
2
and tighten it to the specified torque.
99000-32050: THREAD LOCK “1342”
Gearshift cam stopper bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
NOTE:
Hook the return spring end
A
to the stopper.
• Check that the gearshift cam stopper moves smoothly.
• Set the gearshift cam in the neutral position.