Filter
Top Products
ENGINE 3-89
CLUTCH COVER
• Apply SUZUKI BOND lightly to the mating surfaces at the
parting line between the upper and lower crankcases as
shown.
99104-31140: SUZUKI BOND “1207B” (USA)
99000-31140: SUZUKI BOND “1207B” (Others)
• Install new gasket 1 and dowel pin.
• Apply SUZUKI BOND lightly to the CKP sensor gromet.
99104-31140: SUZUKI BOND “1207B” (USA)
99000-31140: SUZUKI BOND “1207B” (Others)
• Install the clutch cover and tighten its bolts to the specified
torque.
Clutch cover bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
NOTE:
* Fit new gasket washer to the bolts
A
.
CYLINDER HEAD
• Fit the dowel pins and new cylinder head gasket 1 to the cyl-
inder.
Use a new gasket to prevent oil leakage.
Use a new gasket washer to prevent oil leakage.
Use a new gasket to prevent gas leakage.