Filter
Top Products
ELECTRICAL SYSTEM 9-33
FUEL LEVEL GAUGE INSPECTION
• Remove the fuel pump assembly. (5-9)
• Measure the resistance at each fuel level gauge float position.
If the resistance is incorrect, replace the fuel level gauge with
a new one.
09900-25008: Multi-circuit tester set
Tester knob indication: Resistance (Ω)
FUEL LEVEL INDICATOR LIGHT INSPECTION
If the fuel level indicator light does not function properly, check
the fuel level gauge and its lead wire/coupler.
If the fuel level gauge and its lead wire/coupler are functioning
properly, replace the combination meter with a new one.
Float position Resistance
190 mm (7.48 in) 182 ± 3 Ω
56.4 mm (2.22 in) 4 ± 1 Ω
190 mm
(7.48 in)
56.4 mm
(2.22 in)