Filter
Top Products
CHASSIS 8-83
MASTER CYLINDER INSPECTION
CYLINDER, PISTON AND CUP SET
• Inspect the cylinder bore wall for any scratches or other dam-
age.
• Inspect the cup set and each rubber part for damage.
MASTER CYLINDER REASSEMBLY
Reassemble the master cylinder in the reverse order of disas-
sembly. Pay attention to the following points:
Specification and classification: DOT 4
• Apply SUZUKI SILICONE GREASE to the push rod end.
99000-25100: SUZUKI SILICONE GREASE
* Clean the master cylinder components with fresh
brake fluid before reassembly. Never use cleaning
solvent or gasoline to clean them.
* Do not wipe the components with a rag.
* Apply brake fluid to the cylinder bore and all the
component to be inserted into the bore.