Filter
Top Products
FUEL SYSTEM AND THROTTLE BODY 5-15
THROTTLE BODY REMOVAL
• Remove the air cleaner box. (5-14)
• Disconnect the throttle cables from their drum.
• Place a rag under the fuel feed hose and remove the fuel feed
hose.
• Disconnect the STVA lead wire coupler 1, STP sensor lead
wire coupler 2 TP sensor lead wire coupler 3 and IAP sen-
sor lead wire coupler 4 .
• Remove the wire clamps 5 and disconnect the fuel injector
lead wire couplers 6.
• Loosen the throttle body clamp screws at the intake pipe side.
After disconnecting the throttle cables, do not snap
the throttle valve from full open to full close. It may
cause damage to the throttle valve and throttle body.