Filter
Top Products
2-30 PERIODIC MAINTENANCE
CHASSIS BOLTS AND NUTS
Check that all chassis bolts and nuts are tightened to their specified torque. (Refer to page 2-31 for the loca-
tions of the following nuts and bolts on the motorcycle.)
Tighten initially at 1 000 km (600 miles, 2 months) and
every 6 000 km (4 000 miles, 12 months) thereafter.
Item N·m kgf-m Ib-ft
1 Steering stem head nut 90 9.0 65.0
2 Steering stem lock-nut 80 8.0 58.0
3 Front fork upper clamp bolt 23 2.3 16.5
4 Front fork lower clamp bolt 23 2.3 16.5
5 Front fork cap bolt 23 2.3 16.5
6 Front axle bolt 100 10.0 72.5
7 Front axle pinch bolt 23 2.3 16.5
8 Handlebar clamp bolt 23 2.3 16.5
9 Front brake master cylinder mounting bolt 10 1.0 7.0
0 Front brake caliper mounting bolt 39 3.9 28.0
A Front brake caliper housing bolt 22 2.2 16.0
B Brake hose union bolt (Front & Rear) 23 2.3 16.5
C Air bleeder valve
(Front brake caliper & Rear brake caliper)
7.5 0.75 5.5
D Air bleeder valve (Master cylinder) 6.0 0.6 4.5
E Brake disc bolt (Front) 23 2.3 16.5
F Brake disc bolt (Rear) 35 3.5 25.5
G Rear brake caliper mounting bolt 17 1.7 12.5
H Rear brake master cylinder mounting bolt 10 1.0 7.0
I Rear brake master cylinder rod lock-nut 18 1.8 13.0
J Front footrest bracket mounting bolt 23 2.3 16.5
K Swingarm pivot nut 100 10.0 72.5
L Swingarm pivot lock-nut 90 9.0 65.0
M Rear suspension bracket nut 115 11.5 83.0
N
Rear shock absorber mounting bolt/nut (Upper & Lower)
50 5.0 36.0
O Cushion rod nut 78 7.8 56.5
P Cushion lever mounting nut 98 9.8 71.0
Q Rear axle nut 100 10.0 72.5
R Rear sprocket nut 93 9.3 67.5
S Steering damper bolt/nut 23 2.3 16.5
T Rear brake caliper pin bolt 32 3.2 23.0