Filter
Top Products
2-12 PERIODIC MAINTENANCE
ENGINE OIL AND OIL FILTER
ENGINE OIL REPLACEMENT
• Remove the under cowlings. (8-5)
• Keep the motorcycle upright.
• Place an oil pan below the engine, and drain oil by removing
the oil drain plug 1 and filler cap 2.
• Tighten the drain plug 1 to the specified torque, and pour
fresh oil through the oil filler. The engine will hold about 2.2 L
(2.3/1.9 US/Imp qt) of oil. Use of SF/SG or SH/SJ in API with
MA in JASO.
Oil drain plug: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Start up the engine and allow it to run for several minutes at
idling speed.
• Turn off the engine and wait about three minutes, then check
the oil level through the inspection window. If the level is
below mark “L”, add oil to “F” level. If the level is above mark
“F”, drain oil to “F” level.
(ENGINE OIL)
Replace initially at 1 000 km (600 miles, 2 months) and
every 6 000 km (4 000 miles, 12 months) thereafter.
(OIL FILTER)
Replace initially at 1 000 km (600 miles, 2 months) and
every 18 000 km (11 000 miles, 36 months) thereafter.
F
L