Filter
Top Products
8-26 CHASSIS
INSTALLATION
Install the front fork in the reverse order of removal. Pay atten-
tion to the following points:
• Set the upper surface of the outer tube height A at 5.0 mm
(0.196 in) from the upper surface of the steering stem upper
bracket and tighten the front fork lower clamp bolts 1 to the
specified torque.
Front fork lower clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Tighten the front fork cap bolt 2 to the specified torque and
recheck the front fork outer tube upper surface height A from
the upper surface of the steering stem upper bracket.
Front fork cap bolt: 35 N·m (3.5 kgf-m, 25.5 lb-ft)
• Position the handlebars on the upper bracket.
(8-37 to -38)
• Tighten the front fork upper clamp bolts 3 and handlebar
clamp bolts 4.
Front fork upper clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Handlebar clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Remount the front wheel. (8-10)
• Cable routing (10-17)
• Front brake hose routing (10-24)