APPENDIX 17-7
Cable, Wire, and Hose Routing
1. Run the main harness through lower and right side of the thermostat.
2. Frame ground (with thermostat bracket)
3. Ignition switch connector
4. Meter ground
5. Engine harness
6. Water t emperature sensor
7. Inlet air pressure sensor
8. Clamp
9. To pickup coil and oil pressure switch
10. To fuel level gauge and fuel reserve switch
11. To fuel pump
12. Regulator/rectifier
13. Run the lead through the i nside of the pipe.
14. Speed sensor
15. To side stand switch
16. Neutral switch
17. To alternator
18. To ignition coil
19. Horn
20. Cam sensor
21. Fan s witch
22. Run the harness between the engine bracket and the left s ide space of the heat cover.
23. Starter cable
24. Band
25. Run the cam sensor lead through the inside of the horn lead.