Kawasaki Z750 Camper User Manual


 
CRANKSHAFT/T RANSMISSION 9-11
Crankcase Splitting
Apply liquid gasket to the breather plate mating surface
[A] 1 to 1.5 mm (0.04 to 0.06 in.) thick, and then install
the breather plate.
Sealant - Three Bond: 1207B
Apply a non-permanent locking agent to the threads and
tighten the bolts [A].
Torque - Breather Plate Bolts: 9.8 N·m (1.0 kgf·m, 87 in·lb)
Install the breather hose [A].
Align the white mark on the hose with the white mark on
the pipe.
Install the clamp [B] so that its head faces to right side.
Breather Plate [C]
Install:
Crankshaft and Connecting Rods
Camshaft Chain [ A]
Transmission Shafts and Gears
Dowel Pins [B]
Shift Drum
Shift Forks and Shift Rods
Before fitting the lower case on the upper case, check t he
following.
Be sure to hang the camshaft chain on the crankshaft.
Check to see that the shift drum and transmission gears
are in the neutral position.