Filter
Top Products
16-10 ELECTRICAL SYSTEM
Specifications
Item Standard
Battery:
Type Sealed Battery
Capacity 12 V 8 Ah
Voltage 12.6 V or more
Charging System:
Type Three-phase AC
Alternator output voltage 42 V or more
Stator coil resistance 0.3 ∼ 0.4 Ω
Charging voltage
14.7 ± 0.5 V
(regulator/rectifier output voltage)
Ignition System:
Crankshaft sensor resistance 376 ∼ 564 Ω
Crankshaft sensor peak voltage 1.9 V or more
Camshaft Position Sensor resistance 400 ∼ 460 Ω
Camshaft Position Sensor peak voltage 0.2 V or more
Interlock Operation Voltage 4Vormore
Stick coil:
Primary winding resistance 1.04 ∼ 1.56 Ω
Secondary winding resistance 10.8 ∼ 16.2 kΩ
Primary peak voltage 88 V or more
Spark plug:
Spark plug gap 0.7 ∼ 0.8 mm (0.028 ∼ 0.031 in.)
Electric Starter System:
Starter motor:
Brush length 12 mm (0.47 in.) (Service limit: 8.5 mm, 0.33 in.)
Commutator diameter 28 mm (1.10 in.) (Service limit: 27 mm, 1.06 in.)
Switch and Sensor:
Rear brake light switch timing
ON after about 10 mm pedal travel
Engine oil pressure switch connections
When engine is
stopped: O N
When engine is running: OFF
Fan switch connections
Rising temperature From OFF to ON @ 93 ∼ 103°C (199 ∼ 217°F)
Falling temperature
Fan stops with the temperature 3 ~ 8°C (38 ∼ 46°F)
lower than the operation t emperature range.
ON: Less than 0.5 Ω
OFF: More than 10 MΩ
Water temperature sensor resistance in the text
Fuel level sensor resistance:
Fuel position 4~10Ω
Empty position 90 ~ 100 Ω