Filter
Top Products
ELECTRICAL SYSTEM 16-37
Ignition System
WARNING
The ignition system produces extremely high volt-
age. Do not touch the spark plugs or stick coils
while the engine is running, or you could receive
a severe electrical shock.
CAUTION
Do not disconnect the battery cables or any other
electrical connections when the ignition switch is
on, or while the engine is running. This is to prevent
ECU (Electrical Control Unit) damage.
Do not install the battery backwards. The negative
side is grounded. This is to prevent dam age to the
diodes and ECU.
Crankshaft Sensor Removal
•
Remove:
Right Frame Cover (see Frame chapter)
Crankshaft Sensor Lead Connector [A]
•
Remove:
Rubber Boot (slide out) [A]
Oil Pressure Switch Lead Terminal [B]
Crankshaft Sensor Cover Bolts [C] w ith Clamps
Crankshaft Sensor Cover [D]
•
Remove the crankshaft sensor [A] by t aking off the crank-
shaft sensor bolts [B].