Filter
Top Products
FRAME 15-9
Fairings
Inner Cover R emoval
•
Remove:
Inner Cover Screws [A] and Washers
Inner Cover [B]
Inner Cover Installation
•
Fit the projection [A] on the inner cover [B] into the hole
[C] in the fairing.
•
Install the washers and inner cover screws.
Fairing Removal
•
Remove:
Fairing Mounting Bolts [A] (both side)
Headlight Connectors
Fairing Insta llation
•
Install the headlight connectors.
•
Fit the projections [A] on the fairing bracket into the holes
[B] in the fairing.
•
Tighten the fairing mounting bolts.
Fairing Bracket Removal
•
Remove:
Fairing (see Fairing Removal)
Meter Unit (see Electrical System chapter)
Turn Signal Light Nuts [A] and Lights
Rubber Cover [B]
Clamps [C]
Bolts [D]
Fairing Bracket [E]