Filter
Top Products
ELECTRICAL SYSTEM 16-81
Junction Box
Starter C ircuit/Headlight Rela y I nspection
•
Remove the junction box (see Junction Box Fuse Circuit
Inspection).
•
Check conductivity of the following numbered terminals
by connecting the hand tester and one 12 V battery to the
junction box as shown.
○
Refer to the Junction Box Internal Circuit.
If the tester does not read as specified, replace the junc-
tion box.
Special Tool - Hand Tester: 57001–1394
Relay Circuit Ins pection (with the battery disconnected)
Tester Tester
Connection Reading (Ω)
7-8 ∞
7-13 ∞
(+) (–)
Headlight
Relay
13 - 9
Not ∞ *
9-11 ∞
12 -13 ∞
(+) (–)
13 - 11
∞
(+) (–)
Starter
Circuit
Relay
12 - 11
Not ∞ *
(*): The actual reading varies with the hand tester used.
(+): Apply tester positive lead.
(–): Apply tester negative lead.
Relay Cir cuit Inspection (with the battery connected)
Battery Tester Teste r
Connection (+) (–) Connection Reading (Ω)
Headlight
Relay
9-13 7-8 0
Starter
Circuit
Relay
11 - 12
(+) (–)
13 - 11
Not ∞ *
(*): The actual reading varies with the hand tester used.
(+): Apply tester positive lead.
(–): Apply tester negative lead.