Filter
Top Products
3-70 FUEL SYSTEM (DFI)
ECU
CAUTION
Never drop the ECU, especially on a hard surface.
Such a shock to the ECU can damage it.
ECU Removal
•
Remove:
Seats (see Frame chapter)
Junction Box [A]
•
Take the ECU [A] out along with the harness.
•
Disconnect the ECU lead connectors [B].
ECU Installation
•
Connect the ECU connectors, noting the length of the
locks.
Longer Lock [A]
Shorter Lock [ B]
ECU Power Supply Inspection
•
Visually inspect the terminals [A] of the ECU connectors.
If the connector is clogged with mud or dust, blow it off
with compressed air.
Replace the main harness if the terminals of the main
harness connectors are cracked, bent, or otherwise dam-
aged.
Replace the ECU if the terminals of the ECU connectors
are cracked, bent, or otherwise damaged.