Filter
Top Products
FUEL SYSTEM (DFI) 3-95
Fuel Tank
•
Be sure to place a piece of cloth [A] around the fuel hose
pump outlet joint [B].
•
While pinching the hose joint locks [C] with fingers, pull
the joint out along the delivery pipe.
WARNING
Be prepared for fuel spillage; any spilled fuel must
be completely wiped up immediately.
When the fuel hose is disconnected, fuel spills out
from the hose and the pipe because of residual
pressure. Cover the hose connection with a piece
of clean cloth to prevent fuel spillage.
•
Close the fuel tank cap.
•
Remove the fuel tank, and place it on a flat surface.
○
Do not remove the pump inlet hose [A].
Fuel Tank Installation
•
Note the above WARNING (see Fuel Tank Removal).
•
Route the hoses correctly (see Appendix chapter).
•
Check that the rubber dampers [A] are on the frame and
the fuel tank.
•
Check that the dampers [A] are in place on the fuel tank
as well.
If the dampers are damaged or deteriorated, replace
them.