Filter
Top Products
ENGINE TOP E ND 5-33
Throttle Body Holder
Throttle Body Holder Installation
•
Be sure to install the O-rings [A].
•
Install the clamps [B] as shown and so that its hole fit on
the projection [C] of the holder.
•
Tighten:
Torque - Throttle Body Holder Bolts [D]:
13 N·m (1.3 kgf·m, 113 in·lb)
Throttle Body Assy Holder Clamp Bolts [E]:
2.0 N·m (0.20 kgf·m, 17 in·lb)