Filter
Top Products
3-34 FUEL SYSTEM (DFI)
Self-Diagnosis
•
To enter the self-diagnosis dealer mode 2, open [B] and
ground [A] the lead more than five times [F] within 2 sec-
onds [C] after the lead is first grounded, and then keep it
grounded continuously [D] for more than 2 seconds.
○
Count the blinks of the LED light to read the service code.
Keep the auxiliary lead ground until you finish reading the
service code.
Auxiliary Lead [E]
Self-diagnosis Terminal [G]
NOTE
○
To enter the dealer mode 2 from the dealer mode 1, turn
off the ignition switch once.
Service Code Clearing Procedures
ServiceCodeClearingProcedures
•
Enter the self-diagnosis dealer m ode 2 (see Self
-diagnosis Procedures).
NOTE
○
Make sure to keep the grounding until the following
opening and grounding starts.
•
Pull the clutch lever in more than 5 seconds, and then
release it.
•
Repeat opening [B] and grounding [A] the lead
(self-diagnosis terminal) more than five times [F] within 2
seconds [C] after the lead is grounded, and then keep it
grounded continuously [D] for more than 2 seconds.
Auxiliary Lead [E]
Self-diagnosis Terminal [G]