Filter
Top Products
6-10 CLUTCH
Clutch
Clutch Removal
•
Remove:
Engine Oil (drain, see Engine Lubrication System in the
Periodic Maintenance chapter)
Clutch Cover (see Clutch Cover Removal)
Clutch Spring Bolts [A]
Clutch Springs
Clutch Spring Plate [B] (with thrust bearing and pusher
[C], spring and washer)
•
Remove:
Friction Plates, Steel Plates
Spring, Spring S eat
Clutch Hub Nut [A]
○
Holding the clutch hub [B], remove the nut and washer.
Special Tool - Clutch Holder [C]: 57001–1243
•
Remove:
Clutch Hub
Spacer
•
Using the two 4 mm (0.16 in.) screws [A], pull out the
sleeve [B], needle bearing [C] and clutch housing [D].
•
Remove the spacer.
Clutch Installation
•
Install the following parts on the drive shaft.
Spacer [A]
Needle Bearing [B]
Sleeve [C]
Clutch Housing [D]
Spacer [E]
Clutch Hub [F]
Washer [G]
Nut [H]