Filter
Top Products
ENGINE REMOVAL/INSTALLATION 8-9
Engine Removal/Installation
○
Tenth, temporarily install:
Front E ngine Bracket [C]
Right Upper Engine Mounting Bolt [A]
Front Engine B racket Bolts [B]
○
Eleventh, tighten the right upper engine mounting bolt.
○
Lastly, tighten the front engine bracket bolts.
Torque - Right U pper E ngine Mounting Bolt : 44 N·m (4.5
kgf·m, 33 ft·lb)
Front Engine Bracket Bolts: 44 N·m (4.5 kgf·m, 3 3
ft·lb)
•
Run the leads, cables and hoses correctly (see Cable,
Wire and Hose Routing section in Appendix chapter).
•
Install the removed parts (see appropriate chapters).
•
Adjust:
Throttle Cables (see Fuel System (DFI) chapter)
Choke Cable (see Fuel System (DFI) chapter)
Clutch Cable (see Clutch chapter)
Drive Chain (see Final Drive chapter)
•
Fill the engine with engine oil (see Engine Lubrication
System in the Periodic Maintenance chapter).
•
Fill the engine with coolant (see Cooling System in the
Periodic Maintenance chapter).